主要参数 Main Technical data | |||||||
规格 Item | 单位 Unit | XZL-200 | XZL-250 | XZL-400 | XZL-500 | XZL-600 | |
锁模部分 mold locking parts | 锁模力 Mold-locking force | KN | 2000 | 2500 | 4000 | 5000 | 6000 |
合模行程 Block stroke | mm | 450 | 500 | 600 | 700 | 700 | |
热板尺寸 Heat plate size | mm | 550*600 | 560*630 | 670*780 | 850*850 | 950*9502 | |
热板最大间距 Max. distance of heat plate | mm | 550 | 600 | 780 | 900 | 900 | |
最小模厚 Min. mold thickness | mm | 100 | 100 | 180 | 200 | 200 | |
上液压中子行程upper lifter stroke | mm | 250 | 250 | 250 | 250 | 250 | |
下液压中子行程 lower lifter stroke | mm | 250 | 250 | 250 | 250 | 250 | |
注射部分injection parts | 螺杆直径Screw diameter | mm | 35 | 45 | 55 | 65 | 65 |
螺杆转速Screw speed | Rpm | 0-100 | 0-100 | 0-100 | 0-100 | 0-100 | |
注射容量 injection volume | cc | 1500 | 2000 | 4000 | 8000 | 10000 | |
注射压力injection pressure | Bar | 1970 | 2110 | 2070 | 2070 | 2070 | |
注射塞直径 the diameter of injection piston | mm | 75 | 85 | 105 | 120 | 135 | |
加热分区数量number of heating zones | piece | 2 | 2 | 2 | 2 | 2 | |
注射嘴抵模力 injection unit contact force | KN | 75 | 75 | 75 | 75 | 75 | |
系统压力 Max. working pressure | Bar | 210 | 210 | 210 | 210 | 210 | |
电机功率motor power | KW | 11 | 15 | 22 | 18.5 | 22 | |
机台尺寸dimension | M | 2.8*1.8*3.3 | 2.7*1.8*3.4 | 3.2*2.0*4 | 3.7*2*5 | 4.2*2.5*5.5 | |
机台重量weight | KG | 7000 | 7800 | 12000 | 16000 | 20000 |